Personal discounts do not apply to kilns, if you have a discount please phone to order.
(T&C's apply, discount will not apply to any products that are advertised as non-discountable)
Delivery is free to UK Mainland addresses. Highlands and Islands may incur a delivery charge.
Pro-Fuser Deep Specifications:
Internal size - 850mm (wide) x 510mm (deep) x 330mm (High)
External Size - 1250mm (wide) x 810mm (deep) x 635mm (High)
Weight - 125kg
Power - 6KW
Amps - 25A
Voltage - 230/400v
Maximum Temperature - 960c
Controller included KCR32C
Pro-fuser Deep Features:
Quartz tube "infra-red" heating system
Stainless Steel chamber and base
Lid spring lift assist
Recessed floor with retaining walls
KCR32C digital Control with 32 programs
Optional KCR32CWIFI internet access to kiln status and programs, real time monitoring from any device, anywhere with internet access via the Kilncare GATEway
Fast react thermocouple
Non ceramic fibre lid section
Light weight refractory brick base
Astonishing performance
Fast cooling
Vent hole in front
Optional stand and inner shelf kit
Four years guarantee on ALL parts incuding the elements
Designed and built by Kilncare in the United Kingdom.
The Pro-fuser has fantastic performance. Due to its high performance, infra-red quartz elements and well designed insulation, like the Hobbyfuser 3, the Pro-fuser will also make the all important
700c to 800c dash at a rate of nearly 450 degrees per hour even with the shelf installed.
This makes the Pro-fuser almost infinitely controllable ensuring the glass doesn't get "over-worked" by it being in the heat longer than is required.
Internet access to view real time status and access data.
The optional KCR32C WIFI allows the user to access the kiln in real time from anywhere with internet access via the Kilncare GATEway on their website. The benefits of this are obvious as there is no longer the need to travel to the studio or work place to see how the firing is proceeding or if indeed the firing is going as planned.
Also in the GATEway, which is unique to each user via password access, there is a firings library where past firings can be stored and named, a notes section and a log amongst other features.
Stainless Steel Lid Springs
The lifting and closing of the lid is assisted by 2 pairs of specifically manufactured and designed Stainless Steel coil springs at the rear of the kiln. Accompanied by a single gas spring to make the operation of the lid perfect!
Fibre Lid
The kiln lid is made from stainless steel and lined out with non-ceramic fibre, This method of insulation removes the danger of brick dust or particles dropping onto the glass, so making for a very clean firing environment.
It also makes the Pro-fuser incredibly resistant to shock damage.
This lid construction enables the Pro-fuser to hold back the heat when needed but still release heat rapidly during the all important cooldown period.
Quartz Element Heating System
The heating system is in the roof only and utilises the latest technology "infra-red" quartz tube heating elements. This method is extremely hard wearing and strong, yet in the event of an element failure the tubes are both easy and cheap to replace.
The elements are switched off when the lid is opened by an automatic safety switch.
Angled Vents hole
The front of the kiln has a large vent/peep hole which is closed using a spring assisted flap which houses our unique, anti-dust insulation pad which is taken from our larger fusing kiln models.
The vent/peep hole is angled so that the floor of the kiln and more importantly, your glass, can be seen.
Fast Response Thermocouple
The KCR32C gets its data from an ultra-fast response, stainless steel thermocouple meaning no lag between the kiln temperature and the KCR32Cs control.
The fact that the thermocouple is stainless steel means it is also resilient to accidental damage.
Optional Pro-Fuser Stand
The Pro-fuser stand has two shelves, one for the kiln to sit on and one for your own use. It raises the kiln by 650mm to a comfortable height.
It is made of steel and is powder coated in our Ultra-marine blue.The stand is supplied ready for assembly.
A further option for the Pro-fuser stand is locking, swiveling wheels. The wheels are pre-fitted at our factory but the stand is still sent out ready for assembly.
Suitable for both Pro-Fuser and Pro-Fuser-D
KCR32C Controller
The controller for the kiln can be held remotely to make programming the kiln an easy and comfortable process
32 programs - each with up to 32 segments.
Each segment is a controlled heating/cooling ramp soak.
Suitable for glass or ceramics use.
Soak times up to nearly 100 hours.
Ramp rates from 0.1 to 999°C/hour full.
Program Pause & Segment Advance facilities
Keyboard lockable
Delayed start facility - up to 4 days
Power failure recovery
Energy used display
Event / Damper / Fan relay output
Alarm relay with alarm buzzer
Mains power switch
Built in the United Kingdom
The KCR32C is multi-program controller designed for glass, ceramics & pottery use. It is targeted towards glass use with 32 programs each of up to 32 segments. Each segment is a controlled heating/cooling ramp followed by a soak.
It is supplied pre-programmed with 9 typical glass programs and 9 typical ceramics programs (which can be over-written).
The slow rate capability of the KCR32C, down to 0,1c per hour, makes it the perfect controller for compliccated glass cycles.
KCR32C WIFI Controller (Optional)
The KCR32WIFI is internally the same as the KCR32C but has the capability to be accessed and controlled remotely from your mobile deivce.
This is one of the most important advances in Kilncare kilns for many years.
Using Kilncares GATEway access site you can view how your kiln is running in real time. Stop the firing or adjust programs all without even being in the same country let alone the same room.
The KCR32WIFI is also fitted with a USB port that allows programs to be entered that way direct from PC if required and also allows us to apply updates and run diagnostics without travelling to your kiln.
(T&C's apply, discount will not apply to any products that are advertised as non-discountable)
Free Delivery to the UK mainland only. Delivery is to the property only, you will need to consider that you will need to position the kiln yourself and have the electrical connection done by a qualified electrican.
For any enquires about this kiln please phone 01245 329830.
Non-discountable product, customer discounts do not apply to this product.
The kiln will arrive boxed, on a pallet.
The pallet dimensions are 104cm x 168cm.
The Pro-fuser weighs 125kg.
The kiln will fit through a minimum door width of 90cm (with minor disassembly)